Sewing on a serger/overlock machine is wonderful, but when it comes to unpicking serger stitches, you may find yourself overwhelmed and dreading the whole process. I used to feel this way until I learned this slick and easy way to unpick; and I’m going to show you how it’s done. It doesn’t matter how long you’ve been sewing or how good you are at it, there ARE going to be times that you’ll need to UNPICK! However, once you learn this technique, it won’t matter, because it is so easy to do.
A serger stitch will either use three or four threads to form the stitch: two looper threads and one or two needle threads. In the photo above, I have used a different thread color for each stitch to show you what it looks like. (four-thread stitch).
Before I learned this trick, I would grab my unpicker and try to unpick each stitch. There were little cut threads everywhere, and it took FOREVER! It was so frustrating! I seriously can’t believe and went so long sewing on a serger without knowing this little trick. It makes the process so quick and you don’t have all the cut threads to collect and dispose of.
UNPICKING SERGER STITCHES-HOW TO
The only stitches you are going to pull out are the needle threads. The photo above is a four-needle thread stitch. The RED thread is the left needle stitch, the TAN thread is the right needle stitch, and the blue thread is a looper thread.
1. Take the unpicker and with the point grab the red thread and pull it and cut it. Go down the seam another 1-2 inches and cut the needle thread again. BE CAREFUL NOT TO GRAB THE LOOPER THREADS, this will cause the seam to lock up and the threads will not pull out as easy. Get ahold of one of the tails of the thread you just cut and ease and pull it out of the fabric. (Sometimes you can do the whole seam in one go). Continue this process until you’ve removed that left needle thread completely.
2. If you are using a four-thread, you’ll need to remove the right needle thread as well. Finding the right needle thread can be a little tricky if you are using the same color of thread as the fabric. (A trick to finding the stitch, is to take your unpicker tip and glide it down the little v shape that the looper makes and it will slide right into the right needle stitch). It may seem like a lot of work, but trust me, it goes quickly and you’ll love the results.
3. Here’s the fun part! Once the needle threads are removed, all you need to do is grab the looper threads and give a little pull, and voilà! It will unravel like a dream. There won’t be all those little threads to gather and you’ll be on your way to re-sewing your seam.
I hope this saves you some grief while sewing. Be sure to leave a comment if you have some great sewing tips for us!